Ser III Engine vs T/C mounts which is which?

[TJR]

88 SerIII
In my box of parts I've got 4 rubber mounts which are all unmarked. I bought them years ago and have lost track of which is which.

Is there a size difference between the T/C or engine mounts since RN has 2 PN's listed.

I need to put my egine back into the chassis and want to make sure I use the correct mount. Thanks... TJR

[scott]

For a petrol 2.25 on a series frame the motor and transmission mounts are the same. They are discs, the dzls are cubes

[jac04]

The engine mounts for a 2.25 petrol are NRC2054.
The transmission mounts for a 2.25 petrol are NRC2053.
From what I remember, there are different color paint marks on the engine vs. trans mounts. Maybe someone at RN can pull one of each off the shelf and tell you.

NOTE: 2.25 Diesel engine & trans mounts are the same = NRC2052.

[TJR]

The engine mounts for a 2.25 petrol are NRC2054.
The transmission mounts for a 2.25 petrol are NRC2053.
From what I remember, there are different color paint marks on the engine vs. trans mounts. Maybe someone at RN can pull one of each off the shelf and tell you.

NOTE: 2.25 Diesel engine & trans mounts are the same = NRC2052.

Yup. I have a 2.25L Petrol. The 4 mounts I have are round and studed each ends. Typical really..
I'm not home now to get a height or dia difference as reference

Thanks..

[scott]

Dang it! I just got them mounts and pay no attention and replaced the motor and toss two of 'em in the back of the truck 'til I got time to do the tranny's. I wonder which ones I put on

[galen216]

Just did mine. The engine mounts are larger diameter and the trans mounts are the smaller diameter.

[scott]

I got mine from ba and just checked and they sell their's as either ors