So this isn't the biggest deal, I know its an old truck, but I'm slowly painting the wall of my house with my exhaust. I have to back out of my garage which is opposite the house, and need to make a few maneuvers to get out with the rover. When I back against the house, the exhaust does this. My wife is not so psyched. Should mention I have to get this close to get out of the garage, life in the city.
The truck runs fine, assuming the mixture is ok. I tried to lean it out to see if it would lessen the blast, but didn't make much difference. Maybe I should just put a 90 degree bend on the end of the exhaust...
I should take a less zoomed in photo, hard to get an idea of scale and the multitude of splatters
The truck runs fine, assuming the mixture is ok. I tried to lean it out to see if it would lessen the blast, but didn't make much difference. Maybe I should just put a 90 degree bend on the end of the exhaust...
I should take a less zoomed in photo, hard to get an idea of scale and the multitude of splatters
Comment