Distributor adapter plate - where to get one?

[SeriesShorty]

Does anyone know a source to buy a distributor adapter plate? My hold down bolt must have been a bit too long and cracked off one of the corners when I snugged up the distributor. It's the part found in the green bible page 34-A1, figure A1-58 part B.

If you've got one laying around on an old block that you can part with let me know what ya want for it.

Thanks!

[siiirhd88]

I know there are at least two different thicknesses of the cast aluminum adapters. Which one do you need? I'm typing as I sit here looking at one, the one with the long boss on the bottom.

Bob

[SeriesShorty]

Oh boy, I don't think mine looks like either one of those. I'll have to check to see if it's got a part number stamped on it tomorrow morning. Thanks for the visual aids.

[siiirhd88]

See what you have, and if there is one in the pile I will send it along.

Bob

[SeriesShorty]

I'm having technical difficulties and can't get my pic to upload. But it's got "ADC1" and "549610" stamped on it. It does appear to be the thinner, longer version that you have on the right.

I'll PM you my address in case it's one you can part with.

Much appreciated!!!!

[siiirhd88]

Part sent today.

Bob