Mark III air intake cover

[stonefox]

I'm looking for a intake cover for a MarkIII, I guess the later Smiths used the same? If anybody has a spare they would like to sell drop me a line.

[lrdukdog]

intake

You mean like this?

http://cgi.ebay.com/ebaymotors/WING-TRIM-LAND-ROVER-SERIES-_W0QQcmdZViewItemQQhashZitem255fd53e5aQQitemZ160521600602QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Jim Wolf

[stonefox]

You mean like this?

http://cgi.ebay.com/ebaymotors/WING-TRIM-LAND-ROVER-SERIES-_W0QQcmdZViewItemQQhashZitem255fd53e5aQQitemZ160521600602QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Jim Wolf

Actually I'm looking for the earlier vintage one, a metal one with the expanded metal screen.

[Terrys]

The 'metal one" is S2A, and the hole in an S3 wing is too big be to covered with an S2A vent screen.

[stonefox]

The 'metal one" is S2A, and the hole in an S3 wing is too big be to covered with an S2A vent screen.

Yes, it has to be a 2a.The inner flange takes a 4 1/2'' heater duct.The hole in the wing has yet to be cut. I've been avoiding that task,the thought of cutting into a perfectly good wing just doesnt sit right.

[Terrys]

That being the case, use a hole saw, slow.....very slow. You'll be fine.

[stonefox]

That being the case, use a hole saw, slow.....very slow. You'll be fine.

I dont have a hole saw that large do you think it can be accomplished with a electric nibbler with out effing it up?

[Terrys]

I dont have a hole saw that large do you think it can be accomplished with a electric nibbler with out effing it up?

Not by me for certain. Maybe others can do it. I have 2 4 1/2" hole saws, and see no immediate need for one (let alone 2). If you promise to return it, I'll loan you one.

[stonefox]

That would be great Terry.Sent you a PM.Hey does the loner hole saw come with a spare wing in case this goes south.

[Terrys]

Funny you should say that. I may actually have a late 2A skin with the hole already in it. Too cold and dark to check now. I'll look in the AM, if I don't get kicked out before then.

[lrover109]

might have an intake cover for a 2A - will dig for it if you are still interested - can shoot you a pic as it is not perfect