rear 1 ton leaf springs

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jimsshuman
    1st Gear
    • Apr 2008
    • 136

    rear 1 ton leaf springs

    Anyone have a set of one ton rear springs laying around in their way? series 3 109". Preferably in usable or salvagable condition.

    Or has anyone seen or used the proline 1 ton springs? do they look like this:

    or this:


    $100 dollars difference between LR and proline per spring.
    sigpic
    '91 RRC, SWB (tuned up quite nicely, new water pump, needs radiator repaired or replaced and brakes!) Sold😔
    '74 S III, diesel, 109, rhd, hard top
    (patiently awaiting cummings 4bt, nv 4500, and np200!)
    Finally IN PROGRESS!! Sold😖
  • masonater
    3rd Gear
    • Nov 2007
    • 329

    #2
    I just switched to parabolics on my ex mod 109. Its a 1 ton frame and im pretty sure the springs are 11 leaf, is that what your looking for?
    1970 Series IIA 109 EX-MOD
    1971 Series IIA 109 EX-MOD
    1982 Mercedes 300TD
    1989 RRC
    1993 D110
    1994 RRC LWB
    1995 RRC SWB Brooklands Edition
    1995 RRC LWB
    1995 RRC LWB
    1995 Disco
    1996 GMC 2500 Suburban
    1996 Disco
    1997 Disco
    2001 RR P38
    2005 LR3 HSE
    2006 RR HSE

    Comment

    • jimsshuman
      1st Gear
      • Apr 2008
      • 136

      #3
      My rear springs are 8 leaf. Fronts are 11 leaf.

      What I'm looking for are 8 leaf packs that are approximately 24 inches from center pin to each shackle bolt. 2.5 inches wide. Top leaf is thinner and bottom leaf is thicker than the inner most 6 leaves. Top two leaves are full wrap.
      sigpic
      '91 RRC, SWB (tuned up quite nicely, new water pump, needs radiator repaired or replaced and brakes!) Sold😔
      '74 S III, diesel, 109, rhd, hard top
      (patiently awaiting cummings 4bt, nv 4500, and np200!)
      Finally IN PROGRESS!! Sold😖

      Comment

      • Terrys
        Overdrive
        • May 2007
        • 1382

        #4
        I have a pair. surface rust, but not spread. Need new bushings. (duh)

        Comment

        Working...