Windscreen frame going in this afternoon---double check on seal placement

[knac1234]

Good morning!

Got some good tips on using the glaze from RN from Art yesterday, and now the glass is in place!

Windscreen ready to go in.....just need clarification on where the bottom foam windscreen frame to bulkhead seal goes. Is it red arrow or green arrow (I think green arrow, but my before-pics are fuzzy, so not sure)!

Thanks,
Julian

[Les Parker]

Julian,
Yes, green arrow. You'll need to kep the seal taught (under tension) whilst you put the screen assy on.
I would suggest using a good rubber adhesive (RN uses a Wurth product).

[ca_surveyor]

Julian,

I just mine last weekend and the green arrow is where my old one was, so that's where I placed the new one. One note was that mine still had a gap, so I stacked two on top of each other. Mine had adhesive tape, so I didn't use any adhesive. I also palced the seal after I mounted the frame.

[knac1234]

Thanks.....will do. Mine has adhesive also. Windscreen frame will be the start of the next looong weekend!

Julian