Weather seals

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • canyonero
    Low Range
    • Aug 2011
    • 52

    Weather seals

    I got a set of weather seals (both top and bottom) from our hosts for my 109 3 Door, and I was wondering if I need to apply anything like silicone along with them. The PO appears to have used something rubbery on the bottom, but I can't tell about the top, which is where all the water is coming from. Any thoughts? Thanks.
    1973 Series III, 109, Ex-Mod
    1999 Discovery II, Cataclysmically Lost
  • SafeAirOne
    Overdrive
    • Apr 2008
    • 3435

    #2
    Which weather seals...Doors? Hard top? Windshield?
    Last edited by SafeAirOne; 10-24-2011, 11:02 PM.
    --Mark

    1973 SIII 109 RHD 2.5NA Diesel

    0-54mph in just under 11.5 minutes
    (9.7 minutes now that she's a 3-door).

    Comment

    • jac04
      Overdrive
      • Feb 2007
      • 1884

      #3
      I don't ever remember seeing any sort of sealant applied to the back side of the weatherstripping. Maybe others can comment. The problem with silicone RTV or weatherstripping adhesive is it can be messy and a real PITA to remove if you ever have to replace any pieces of weatherstripping.

      If you use silicone RTV, make sure to use non-corrosive silicone made specifically for metals. Many RTV silicone sealants are 'acid cure'. For 'acid cure’ RTV, exposure of the material to atmospheric moisture initiates a catalyzed reaction of the acetoxy silane crosslinker with hydroxyl capped polydimethylsiloxane linear polymer which leads to the formation of a three-dimensional silicone polymer network and acetic acid.

      Comment

      • bmohan55
        4th Gear
        • Sep 2008
        • 435

        #4
        I just hate three-dimensional silicone polymers...
        04 Disco, Gone-Disco died & so did mine
        '72 S3 88 - Leakey & Squeaky

        Comment

        • canyonero
          Low Range
          • Aug 2011
          • 52

          #5
          Originally posted by SafeAirOne
          Which weather seals...Doors? Hard top? Windshield?
          Top and bottom seals for the hard top to the sides and the sides to the tub as well as a top windshield seal.
          1973 Series III, 109, Ex-Mod
          1999 Discovery II, Cataclysmically Lost

          Comment

          • Donnie
            2nd Gear
            • Apr 2007
            • 287

            #6
            Originally posted by jac04
            I don't ever remember seeing any sort of sealant applied to the back side of the weatherstripping. Maybe others can comment. The problem with silicone RTV or weatherstripping adhesive is it can be messy and a real PITA to remove if you ever have to replace any pieces of weatherstripping.

            If you use silicone RTV, make sure to use non-corrosive silicone made specifically for metals. Many RTV silicone sealants are 'acid cure'. For 'acid cure’ RTV, exposure of the material to atmospheric moisture initiates a catalyzed reaction of the acetoxy silane crosslinker with hydroxyl capped polydimethylsiloxane linear polymer which leads to the formation of a three-dimensional silicone polymer network and acetic acid.
            Boy I really hate it when that happens.....Donnie
            I spent most of my money on women & cars, the rest of it I just wasted.......

            Comment

            • TeriAnn
              Overdrive
              • Nov 2006
              • 1087

              #7
              Originally posted by canyonero
              Top and bottom seals for the hard top to the sides and the sides to the tub as well as a top windshield seal.
              REPLACE THE BOTTOM WINDSCREEN SEAL AS WELL.
              -

              Teriann Wakeman_________
              Flagstaff, AZ.




              1960 Land Rover Dormobile, owned since 1978

              My Land Rover web site

              Comment

              Working...