Master cylinder Reservoir stuck!!

[esquivelia]

Attempting to rebuild(plc 454) and the reservoir is stuck to the master cylinder and I'm afraid i'm going to break it. I've go it soaking with liquid wrench. Just wondering if anyone has any remedies to this problem??

I have removed the two screws.

Thanks--Cory-

[daveb]

they are a royal BITCH to remove. once they are removed they are ruined. don't do it unless it is leaking.

Attempting to rebuild(plc 454) and the reservoir is stuck to the master cylinder and I'm afraid i'm going to break it. I've go it soaking with liquid wrench. Just wondering if anyone has any remedies to this problem??

I have removed the two screws.

Thanks--Cory-

[esquivelia]

Do you mean don't rebuild it unless it is leaking?

[daveb]

what I mean is unless it is necessary to remove the reservoir, don't.

I've had them leak @ the rear nipple. IIRC the front comes out easily

rgrds
dave

Do you mean don't rebuild it unless it is leaking?