Tweet
Hello all. I followed information found on several forums and jumped the blue diagnostic plug to reveal the above code. The code - Faulty stoplight switch or wiring.
My ABS and traction control (2 circles with an exclamation mark in the middle?) lights have been staying on. Brakes work terrific however.
I cleared the code and drove it. A re-check revealed the same code. All fuses (2 five amps, a 25 amp, and the large 30) are okay. Replaced the two black relays - no help.
I have also noticed when I tap my brakes it "slightly" dims the headlights/ dashlights, and the 2 above stated warning lights. Hardly noticeable but at night I can tell while driving it.
My question: Any thoughts as to where to look to solve the ABS issue? The abs pump comes on and seems to work fine. Does not run but maybe 30-40 seconds on initial startup. Brake pedal feels perfect.
I installed new calipers in the front and bled the brakes properly. I have also tamped-in the ABS sensors making sure they are seated.
Any help would be greatly appreciated.
My ABS and traction control (2 circles with an exclamation mark in the middle?) lights have been staying on. Brakes work terrific however.
I cleared the code and drove it. A re-check revealed the same code. All fuses (2 five amps, a 25 amp, and the large 30) are okay. Replaced the two black relays - no help.
I have also noticed when I tap my brakes it "slightly" dims the headlights/ dashlights, and the 2 above stated warning lights. Hardly noticeable but at night I can tell while driving it.
My question: Any thoughts as to where to look to solve the ABS issue? The abs pump comes on and seems to work fine. Does not run but maybe 30-40 seconds on initial startup. Brake pedal feels perfect.
I installed new calipers in the front and bled the brakes properly. I have also tamped-in the ABS sensors making sure they are seated.
Any help would be greatly appreciated.
Comment