ECU "Pin Removal / Replacement"

[luketheshep]

RRC with 14CUX.

I was doing some voltmeter testing when the number 27 wire (ground) completely slipped out of the connector.

Can I remove that pin or connector from the plug so I can reattach and if so how? Are there replacement pins available for sale?

Any recommendations are welcome..

Thanks!!!

[PaulBarrow]

Is it still connected to its wire? If so you should be OK to push it back in. However you will need to ensure that it is well aligned or when you push the plug back in it will buckle and not allow you to reconnect.

Paul

[luketheshep]

thanks for the reply.


the connector is in the plug and the wire is not connected to it!

Thanks for any direction......