classic 1995 LWB won't start

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fishhunt22
    Low Range
    • Apr 2007
    • 9
    #1

    classic 1995 LWB won't start

    I have a 1995 LWB and the car won't start. It cranks over but won't catch. I had this same thing happen with I used degrease on the enigne and hose it off. It has been raining a lot and it looks like I have a lot of moisture under the hood. Any ideas?

    Mike t
    Tags: None
    • audix
      Low Range
      • Dec 2008
      • 2
      #2
      getting your RRC to start

      Hi, I just experience the same challenge a few days ago.

      1. disconnect and clean the stepper motor that is located near the left side of the plenum close to the windshield. You will see an electrical connector that has to be removed and then unscrew the stepper motor.

      2. Ensure that your airflow control is dry. Follow the air intake path and ensure that it's dry

      3. Check your distributor cap. check all cables are firmly connected.

      Let me know how it goes.

      Audix

        Comment

        • audix
          Low Range
          • Dec 2008
          • 2
          #3
          location of stepper motor - air intake

          http://roversnorth.com/store/popup.aspx?src=images/Product/large/RNM077.JPG

            Comment

            Previous template Next
            Working...