changing 10 spline rear axles to 24 spline

[dstack]

I have a coil sprung series land rover using the the series diff and the 10 spline rear axles from an 89 rr classic, I would like to put in a 24 spline locker and 24 spline axles, what rear axles from later rover vehicles would work?
Thanks in advance for any info.

[KevinNY]

Don't bother with stock rover axles if you are going with a locker. Keith at Rovertracks can set you up with rear HD 24 spline axles for reasonable change. You will need a set of spindles off of a later RRC or disco I, easy and cheap to source and swap.

[CliftonRover]

I just changed a 24 spline axle under my 10 spline RRC. It ended up being easier to switch the whole casing wheel to wheel for me.

[dstack]

Thanks for the info.