Blend motors

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kevin-ct
    replied
    I have a customer that purchased a set of blend motors from the Uk for about $300 and I charged him 5 hrs to install them. You don't need to remove the whole dash

      Leave a comment:

    • joshua.mcguoirk
      replied
      Blend/Servo Motor

      I've been unsuccessful with this option you describe. I too have the same issue. Went to http://www.rangerovers.net and followed the advice for tear-down only to discover that the wiring was different. I too need to find a permanent solution.

      I troll eBay looking for units. Every now and then you will find a set that was dismantled to sell individually. Good luck.

      Whilst at the dealer one day... I asked for an estimate. ~$550.00 for part with 12 hours labour. YIKES! 12 hours? They explain that the entire dash and center console needs to be removed.

      Cheers,

        Leave a comment:

      • GeoffBooth
        started a topic Blend motors

        Blend motors

        My right hand blend motor as gone bad. These thing are now $500 for some reason.

        Question: I read somewhere that a servo from the fresh air duct may work to replace a single blend motor. What do you think?
        Tags: None
        Previous template Next
        Working...