found out its running lean/rich on bank two.
where in cylinder #1??
says it might be a o2 or maf sensor if its both banks.
what is bank one and which is bank two??
found out its running lean/rich on bank two.
where in cylinder #1??
says it might be a o2 or maf sensor if its both banks.
what is bank one and which is bank two??
There are 2 crankcase vent. hoses on the back of the intake, usually covered by a heated "blanket." These get gooey and allow unmetered air into the system causing these codes. Easy repair. Take off the accuostic cover and you will see the "blanket."
thank you, ill try that tip!