I have that little set of bushing drivers and they are handy for bench work. They are not even close to what you need for the frame bushings though.
I had very fast results with a burr in a die grinder to weaken the wall of the bushing and then drove them out. You can see the mushrooming on the driver where I was trying to remove them prior to weakening them. They came out easily after weakening them.
I had very fast results with a burr in a die grinder to weaken the wall of the bushing and then drove them out. You can see the mushrooming on the driver where I was trying to remove them prior to weakening them. They came out easily after weakening them.
Comment