Tire wear warning plate

[Paul and Judson]

I remember seeing someone on the forum that had made a reproduction of this warning plate. I need one. Any suggestions on where I could get a reproduction or an original in good and unfaded condition ?

[NC_Mule]

Is this the one that talks about excessive wear if you use 4 wheel drive on the road for an extended time? The one on my truck is in good shape. If you decide to have one made I would be glad to take mine off and mail it to you as a template. I would expect it to be returned in a timely manner.
pb

[Partsman]

Is this the one that talks about excessive wear if you use 4 wheel drive on the road for an extended time? The one on my truck is in good shape. If you decide to have one made I would be glad to take mine off and mail it to you as a template. I would expect it to be returned in a timely manner.
pb

Do you have a scanner? If you could scan it at 600 dpi, and email it to me with precise measurements, I could get a price on having them printed up. I could make several for anyone interested.

[NC_Mule]

My buddy has a scanner. I'm not a cumpter guy so I would have to figure out what 600dpi is. On second thought another buddy owns a nice print/graphics shop in town. I'm sure he could scan it in 600dpi. I could also ask if he could make them. He's got some high dollar Eq.
pb

[Partsman]

Well if he can't, I do business with a print shop on a regular basis, and they can print to aluminum plates that would be a reasonable facsimile of the original. 600 dpi is 600 dots per inch, it's a resolution setting for the scanner.

[Paul and Judson]

Yes, it is the red plate that talks about excessive tire wear. I do not have a scanner or a good example of the plate as mine is a bit faded. So I would be interested in buying one if a good reproduction can be made.

[Partsman]

I'm trying to get a hi res scan of this one:



When I do, I'll get a quote for the cost of having one printed on aluminum plate for you.

[o2batsea]

This guy sells repoduction ones that don't say "The Rover Motor Company...." If you can live with that.

http://www.landroverchassisplates.co.uk/page4.htm

I was able to throw myself on the mercy of the Rover community and got a very very nice original one from Neil H. Maybe you could do the same.

[Partsman]

One of my friends over on the Series 2 club gave me this link, it should save a bit of fooling around.

http://www.ebay.co.uk/itm/LAND-ROVER-SERIES-1-2-3-88-109-110-90-SNOWPLOUGH-CLASIC-CAR-VAN-CHASSIS-PLATE-/200651011858?

[Paul and Judson]

Thanks to all for the good help and advise

[Tsmith]

I have a much smaller ( 0.875" x 3.875") one that I've just scanned....not in great condition. I can e-mail the .pdf to you if it will help. It came loose in my SII truck and I don't know where it goes.

Tom

[east high]

Ike might have some of those plates. http://www.pangolin4x4.com/

[Tsmith]

This is the plate from (I think) my SII SWB Stationwagon.Tom Smith

[Partsman]

Ok, so this is what I've got:



I can clean this up and send it to a printshop and have it printed on .040 aluminum, or you can do that on your end, either would work.

[Paul and Judson]

I am interested. Any one else? What would the plate cost?