While changing the exhaust gasket between the exhaust manifold and downpipe, I broke off one of the 3 bolts holding the downpipe on the manifold. Two of the boltholes are accessable and can be drilled out from the topside of the engine, the third is directly under the manifold and must be accessed from below with a 2-foot long drill bit (impossible, in other words). Guess which one broke off?
Before I pull the manifold(s) off and drill out the broken bolt, I figured I'd ask if anyone had any other secret, easier method or trick that would require a minimum amount of profanity-screaming on my part...
Now to find a 2.5 diesel intake/exhaust manifold gasket...
Before I pull the manifold(s) off and drill out the broken bolt, I figured I'd ask if anyone had any other secret, easier method or trick that would require a minimum amount of profanity-screaming on my part...
Now to find a 2.5 diesel intake/exhaust manifold gasket...
Comment