BUGEYE Registry

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Rineheitzgabot
    4th Gear
    • Jun 2008
    • 386

    #76
    Check out this "Bugeye" (in quotes for a reason). Not sure what to think about it.



    VIN seems invalid, unless I am missing something. Could be an erroneous VIN placard.

    Check out the shot of the wheel where in plain view is a missing lug nut.

    Doesn't look in bad shape though. Daurie, do you know this vehicle?

    -Gary
    "I can't believe I'm sitting here, completely surrounded by no beer!" -Onslow

    Comment

    • HybridIIA
      1st Gear
      • Dec 2006
      • 100

      #77
      Don't know why, but it looks like the snorkel is hooked up to the fan intake for the heater.
      '62 109 - coil sprung
      '64 88 - coil sprung

      Comment

      • LaneRover
        Overdrive
        • Oct 2006
        • 1743

        #78
        If there is no heater (or a different one) sometimes folks run the snorkel through there to avoid cutting any metal.

        Or the guy likes non-dusty air heating the cabin of his Rover
        1958 107 SW - Sold to a better home
        1965 109 SW - nearly running well
        1966 88 SW - running but needing attention
        1969 109 P-UP

        http://www.facebook.com/album.php?ai...2&l=64cfe23aa2

        Comment

        • 1969bugeye
          Low Range
          • Oct 2009
          • 6

          #79
          budeye registry

          so do you have an up dated list?? i have one to add is it the number on the frame your looken for?? 5551F
          marine blue, its just stating to take shape from a frame up "sympathetic restoration" after sitting for 5 years mostly on the walls of my garage oh and the frame made a very nice lawn ornament but I finally got around to the frame por-15 turned out nice but the factory drip marks really showed through the por-15 not to mention getting the relay out was quite the project
          all new rubber rebuilt front end and all slave cylinders lots a new fixings but still a lot to do on every system and floor boards before its back on the road shooting for the end of the year
          first sold middle of july 1969 in CA no import records
          its been in the family in Sonoma county CA since 1975 weekend summer trips and rescued countless stuck vehicle's 1989 it was retired from a daily driver all service records back to the warranty book
          had a red 1970 parts vehicle long gone
          i noticed that the front hubs on a lot of bugeyes that I have seen pictures of are the older style are they locking hubs ?
          happy birthday bugeye the big 40
          1969 bugeye

          Comment

          • Rineheitzgabot
            4th Gear
            • Jun 2008
            • 386

            #80
            Originally posted by 1969bugeye
            so do you have an up dated list?? i have one to add is it the number on the frame your looken for?? 5551F
            marine blue, its just stating to take shape from a frame up "sympathetic restoration" after sitting for 5 years mostly on the walls of my garage oh and the frame made a very nice lawn ornament but I finally got around to the frame por-15 turned out nice but the factory drip marks really showed through the por-15 not to mention getting the relay out was quite the project
            all new rubber rebuilt front end and all slave cylinders lots a new fixings but still a lot to do on every system and floor boards before its back on the road shooting for the end of the year
            first sold middle of july 1969 in CA no import records
            its been in the family in Sonoma county CA since 1975 weekend summer trips and rescued countless stuck vehicle's 1989 it was retired from a daily driver all service records back to the warranty book
            had a red 1970 parts vehicle long gone
            i noticed that the front hubs on a lot of bugeyes that I have seen pictures of are the older style are they locking hubs ?
            happy birthday bugeye the big 40


            Bugeye,

            Thanks for your enthusiasm and your information.

            Put down the whole VIN. It is located on the placard in the dash or yes, on the side of the horn, on your frame. The updated list is on the first entry in this post. Give me all of your information, and please post some pics, and I will get the list updated.

            Thanks again,
            Gary
            "I can't believe I'm sitting here, completely surrounded by no beer!" -Onslow

            Comment

            • 1969bugeye
              Low Range
              • Oct 2009
              • 6

              #81
              Originally posted by Rineheitzgabot
              Bugeye,

              Thanks for your enthusiasm and your information.

              Put down the whole VIN. It is located on the placard in the dash or yes, on the side of the horn, on your frame. The updated list is on the first entry in this post. Give me all of your information, and please post some pics, and I will get the list updated.

              Thanks again,
              Gary

              ya im trying to get enthusiastic or keep it going thats why im here but its been a long haul from box to chassis and its going to be longer haul with little mechanical skills till its trail ready anyway aaahhh i thought you needed the last 4#?
              so what other info?
              the pics could be a ah technical problem i will work on it
              so do you know about the hub issue do you have locking hubs?
              can i use the bugeye logo?
              thank you
              jason
              1969 bugeye

              Comment

              • Rineheitzgabot
                4th Gear
                • Jun 2008
                • 386

                #82
                Bug,

                You are right. You can just give me the last four of the VIN. Yes, please get pics.

                What do you mean by "use", in reference to the logo?

                -Gary
                "I can't believe I'm sitting here, completely surrounded by no beer!" -Onslow

                Comment

                • JSBriggs
                  1st Gear
                  • Dec 2006
                  • 111

                  #83
                  Originally posted by 1969bugeye
                  so do you know about the hub issue do you have locking hubs?
                  jason
                  Mine has the factory drive flanges on the front. Locking hubs are a common option/accessory. Everyone has their preference/favorites. I wouldn't say one is more 'correct' than another.

                  -Jeff

                  Comment

                  • 1969bugeye
                    Low Range
                    • Oct 2009
                    • 6

                    #84
                    thank you
                    i thought the hubs might indicate the production date
                    1969 bugeye

                    Comment

                    • 1969bugeye
                      Low Range
                      • Oct 2009
                      • 6

                      #85
                      Originally posted by Rineheitzgabot
                      Bug,

                      You are right. You can just give me the last four of the VIN. Yes, please get pics.

                      What do you mean by "use", in reference to the logo?

                      -Gary


                      personal use im not sure
                      1969 bugeye

                      Comment

                      • TSR53
                        5th Gear
                        • Mar 2006
                        • 733

                        #86
                        The current logo is designed for forum use only at this point. Stay tuned, there is something in the very near future to satisfy your "personal use" needs
                        Cheers, Thompson
                        Art & Creative Director, Rovers Magazine
                        Rovers North, Inc.

                        Comment

                        • 1969bugeye
                          Low Range
                          • Oct 2009
                          • 6

                          #87
                          thank you everyone

                          thanks every1 and thank you rovers north
                          1969 bugeye

                          Comment

                          • Rineheitzgabot
                            4th Gear
                            • Jun 2008
                            • 386

                            #88
                            Originally posted by TSR53
                            The current logo is designed for forum use only at this point. Stay tuned, there is something in the very near future to satisfy your "personal use" needs
                            Still waiting...


                            "I can't believe I'm sitting here, completely surrounded by no beer!" -Onslow

                            Comment

                            • redfoxrovers
                              Low Range
                              • Apr 2009
                              • 21

                              #89
                              11-14-09 Are parts still available?
                              David Ducat
                              Lebanon, CT
                              Mobile # 8607059443
                              daducat@msn.com
                              (redfoxrovers)

                              Comment

                              • yank
                                1st Gear
                                • Nov 2007
                                • 191

                                #90
                                David, Does Yankee Rovers still exist?
                                72 SIII

                                Comment

                                Working...