Clutch Pedal Box

[Jim-ME]

Since it was warm today I decided to replace my clutch MC. I snapped one of the bolts that holds the pedal assembly to the bulkhead. Does anyone know what size the bolts are? I know they are fine thread but it would be better to know what I am looking for instead of hauling the assembly into the hardware store and trying bolts. As always thanks for the help.
Jim

[Mercedesrover]

5/16" x 24

[crankin]

Is this IIa specific? Because I am almost sure that on my SIII it was a 7/16.

[greenmeanie]

Nope, 5/16-24 or, to give it another name, UNF on all of them.

[cachinfool]

Is this IIa specific? Because I am almost sure that on my SIII it was a 7/16.

7/16" is the wrench size.

[scott]

7/16" is the wrench size.

i beg to differ, my 5/16-24s use 1/2" wrench

[Rineheitzgabot]

1/4 inch bolts go 7/16 wrench.

5/16 go 1/2.

Thread count doen't affect bolt head size. My two-hundredths of a dollar for the day.

[cachinfool]

i beg to differ, my 5/16-24s use 1/2" wrench

Me bad, of course you are correct. I just got through removing all of that stuff and 90% of the time I was using a 7/16" wrench and socket with the occasional 1/2", that must have been one of the occasional 1/2" times.
The pivot pin for the clutch peddle linkage was so gummed up that the clutch peddle would not come back up so I ended up removing and dismantling the whole thing so I could clean it up and get it into operating condition.

[Jim-ME]

Clutch MC and line to the slave are all installed and work great. Thanks to everyone for their help.
Jim

[I Leak Oil]

Clutch MC and line to the slave are all installed and work great. Thanks to everyone for their help.
Jim

Glad to hear it's fixed. What size wrench did you use?.....Just kidding.....
Jason T.