Clutch plate stuck

[Windsma]

Help.

Its up on the lift now, is there a trick to knocking this thing loose. Im not trying to take the trans out.. yikes
1968 Series II 4cyl.

[printjunky]

On my second Rover (a $50 true barn find - well, behind-the-barn find), back in 90-something, It had a fused clutch plate. We put it in gear and towed it. If I remember correctly, it took awhile, and we had to do some jerking to free it.

[Windsma]

We bled the system, and the clutch linkage does move.


also if anyone can help me find a new top for a (IIa i think) 2 door long wheel base, ide be very appreciative.

A proper introduction is in order but this was also a "Barn Find"

1968 Land Rover 109 Series IIa
Restored 12 yrs ago, We are the 3rd owner, Right hand drive imported from New Zealand
It has been sitting for 4 yrs. Although in good condition it was crazy dirty.
Took one hour and one knuckle to get it running..
$4400 (with the crazy prices these things go for, let me know how we did?)

[LaneRover]

We bled the system, and the clutch linkage does move.


also if anyone can help me find a new top for a (IIa i think) 2 door long wheel base, ide be very appreciative.

A proper introduction is in order but this was also a "Barn Find"

1968 Land Rover 109 Series IIa
Restored 12 yrs ago, We are the 3rd owner, Right hand drive imported from New Zealand
It has been sitting for 4 yrs. Although in good condition it was crazy dirty.
Took one hour and one knuckle to get it running..
$4400 (with the crazy prices these things go for, let me know how we did?)

Unless the frame is swiss cheese you did great!!

[rover_chump]

Canvas Top

Nice looking Land Rover windsma!

We have new canvas tops here in stock @ RN

http://www.roversnorth.com/store/p-4708-deep-weave-classic-canvas-top-full-length-style-109-with-side-windows-sand.aspx

Feel free to call, fax or email if you have any questions!

If you haven't freed up the pressure plate & disc yet...
(if the LR starts...and you have room to drive it around...start it up, low range, 4th gear...
feather the gas while holding the clutch pedal down...dont run into anything...usually
the torque will help seperate the clutch components)

Peace,
Art

[Windsma]

Thanks Art,
checking w/ them now

[rover_chump]

Canvas Top

Oops....sorry 'bout that windsma!

We do have a "very lightly used" green canvas on clearance.

Part # PLB763X Was $400 I can let you have it for $350



And...are "presently out of stock" on new ones.

Peace,
Art