Tweet
I'm about to buy a new mechanical fuel pump for my 2.25 petrol. Looking at the photos of the pumps, what are people using to connect the fuel lines to the pump? I see that our hosts sell the hose with fittings that are attached, but for the price of them, I think I am considering running traditional rubber fuel lines. If you are just fitting a hose barb fitting into the fuel pump, what is the thread I need to order?
-
Bad gas mileage gets you to some of the greatest places on earth. -
I dont know if he still has them, but George (RDS) had the genuine ones for cheap a while ago. They look cleaner than a bunch of hose clamps. -
last I knew the line from the sender to the carb is hard to find. RDS was out a few weeks ago, host also NLATHING 1 - 1973 88 SIII - SOLD
THING 2 -1974 88 SIII Daily Driver - SOLD
THING 3 - 1969 88 SIIA Bugeye Project
THING 4 - 1971 109 SIIA ExMod - SOLD
THING 5 - 1958 109 PU
THING 6 - 1954 86" HTComment
-
Sender = fuel pump. The fuel pump sends fuel to the carb.
So, the carb = receiver.
Comment
-
OOps, meant fuel sender (tank) to the fuel pumpTHING 1 - 1973 88 SIII - SOLD
THING 2 -1974 88 SIII Daily Driver - SOLD
THING 3 - 1969 88 SIIA Bugeye Project
THING 4 - 1971 109 SIIA ExMod - SOLD
THING 5 - 1958 109 PU
THING 6 - 1954 86" HTComment
-
Uh, OK. So the tank is the sender, and the carb is the receiver, so the pump must be the repeater.Comment
Comment