1963 88''

[jac04]

On my 63, the reflectors were fairly small (maybe 1.25" diameter) and mounted in rubber retainers. I got the reflectors in a bunch of parts from the original owner, but I had to make the rubber retainers out of some brake wheel cylinder rubber boots.

For the miltary size reflectors (about 2.25") that mount with a stud, they are available from RN ($$$ Genuine). I got mine from rovahfarm for $7 each. They are p/n 551595.

[stonefox]

Thanx Jeff.

[LaneRover]

Glassware ???? Nope, tap hits right off the keg

While doing handstands?

[Bostonian1976]

picture of said reflector...

[jac04]

^^Those look like the large reflectors. The originals on the 63 that I restored were much smaller, like this:

[Bostonian1976]

oh - yeah that truck is sort of a mutt.

[stonefox]

While doing handstands?

I can tell you've been to a kegg'r or two

[stonefox]

Windscreen, vents,wiper motors ,steering assembly, yadda,yadda,yadda....

[masonater]

did you already finish this and are posting pics hours apart to make us feel bad?? You are really cooking, some clutch job!

[stonefox]

I am close to being done. My pics and posts are definately not a true time line of the steps complete,although I did start on Jan. 25 this winter.Next tuesday will be 4 months.As many of you know there is more than a few long evenings that have taken place over the last few months.Looking forward to driving it this summer.

[stonefox]

^^Those look like the large reflectors. The originals on the 63 that I restored were much smaller, like this:

Jeff,I hope one day to make it to the your level .You are really at the top of the class.Is there a thread on your 63 build?
Here is my tail section pics.

[jac04]

Is there a thread on your 63 build?

Unfortunately not. Most of the work was completed in the early 90's. "Ivarra" here on the forums now has it and he has performed a few upgrades.

[stonefox]

Drove my truck out of the shop tonight under its own power. Was dying for a test drive. Have a few leaks to contend with but it ran great. I'll get the wings and the bonnet on as soon as I have them sorted.

[scatterling]

....uhmmm...
it's been three days since you posted updates. sheesh you could have built another truck in that time.

[I Leak Oil]

That's because Sean finally got it back together and realized he forgot to do the clutch....