Pickup cab 109 mounting

[siiirhd88]

Jeff,

I'm not sure how the cab will mount if you are working with an SWB 88. I haven't tried the cab on my 88 yet...... I know the filler plate is needed to span the gap between the cab back and the bulkhead, which is a few
inches further forward in an 88.

Bob

siiirhd88 & partsman-

Thanks for the pics and dimensions. I laid the back of the cab top out with the metal plate that mounts between it and the bulkhead, and combined with your info it all seems to make sense now. Thanks!

Jeff

[badvibes]

Jeff,

I'm not sure how the cab will mount if you are working with an SWB 88. I haven't tried the cab on my 88 yet...... I know the filler plate is needed to span the gap between the cab back and the bulkhead, which is a few
inches further forward in an 88.

Bob

Ah ha moment here..... I didn't realize that the positon of the bulkhead was different between the 88 and the 109. Makes sense though. I may not even need the brackets that bolt to the bulkhead. The filler plate may suffice. I won't know for sure til after the 1st of the year though, I have a hunt in Jan that I'm leaving the full top on for. I need it to mount my roof top tent. After that I'll get after it to swap the full top for the cab top. Thanks again for the info.

Jeff