MY DOOR WON"T OPEN!!!!!!

[dwporter90rc]

i got it open!!!!!!!!

i GOT THE DOOR OPEN, yeah yeah i GOT THE DOOR OPEN!! (IT WAS THE LOCK, IT WASN'T FULLY ENGAGING!!!!

noW, I GOTTA PEE!!!!!

[Ed*]

hey that great!

can you post and tell us how you got it open and how you figued out the lock was at fault. Just in case one of us runs into this issue it would be great to have the solution paired up with the problem.

ed

[kevin-ct]

Wow, Can you look at the latch and see the lever that works the locking? Can you see if that is fully unlocking?

My friend had this happened to him, he drove over to my house and I found the locking rod sticking, after applying PB Blaster I was able to open the door after working the lever back and forth.

Not saying you are having trouble with this, but I cannot see the latch had broke by you repairing the window motor.

Where are you located?

Didnt I say that? Glad you are not stuck in the car anymore.......

[dwporter90rc]

how i did it!

ok, i took the otherside apart to see how the lock works, I noticed that there is a "hinge" in the lock, fully "flat" it will unlock, hinged just a little it won"t open, which mine was, just a tad. so i got the jack handel, after i tore "EVERYTHING OUT!" and a hammer, and gently taped the "hinge part" flat. this allowed it to work properly, Neadless to say i took it out cleaned it up, really well, and put some teflon on it! I can't find any pictures or learn the name of the parts, so sorry. Or did you mean how i peed? well i had to use the shower, becasue i had to go! with my pants around my ankles, i let it rip!! Darm super big gulps!!!!

Now can anyone tell me where i put the duck tape, to get the window in........

[jgkmmoore]

Fix a non opening door

In the Seattle area, just take it to Gord'n at LaMorna Motors. It will take 1 hour and 10 minutes. He's a great guy, but don't expect him to tell ya how he did it.