How I replaced a 95 lwb brush bar

[mearstrae]

Not having found a brush bar at a decent price, this model having the Crush Cans. Instead of chopping off the Cans and retrofitting a bar for an older model (and causing a problem with the SRS), I installed a stainless steel Bull Bar from a Disco. All that I needed to do was ream out the mounting holes in the frame from 7/16" to 1/2", and bolt it up. Even the plinth cover fit right up. It's a really different look for a Range Rover. Hope this helps someone out there.

[jimsshuman]

Pictures?

[mearstrae]

I'll get some pics, if it ever stops raining here... I also added Hellas, mat black bonnet, and Defender-like 5 bar bonnet protection.

[mearstrae]

Before change pics

Here's a pic from a few years ago (before the changes), it was used in Ireland to advertise number plate sales.

[mearstrae]

bar pics

Here's a pic of the change over.

[o2batsea]

Look out, Bambi !