Ragtop install

[mrdoiron]

great, thanks for the info... appreciated.

[wooday]

I'm getting PM'd about once per week since posting about a PDF file with instructions that I have. I believe those who have received it found it useful. Can Les or someone post it here so I don't have to email it out over and over?
Les, I sent it to you a while back. If you don't have it anymore I'll gladly send it again.
Thx

[Windsma]

I hate to post in a sticky but could you please list where you bought the Soft top from.

[Windsma]

Seems i was shipped the Defender 110 top. Any way to modify it to work.. or send it back to the UK?

The new EXmoor top i bought doesnt have the recest holes in the front as pictured. Its solid across the front w/ a sewn rope inside to be tucked under the lip. When i tuck it under there.. then its not long enough to fit the door opening.

[Les Parker]

You could try a local trim shop, the best ones for this would be a boat trim shop.
All the best with it.
We have the Sand tops with windows due in later this week.

[Bertha]

Seems i was shipped the Defender 110 top. Any way to modify it to work.. or send it back to the UK?

The new EXmoor top i bought doesnt have the recest holes in the front as pictured. Its solid across the front w/ a sewn rope inside to be tucked under the lip. When i tuck it under there.. then its not long enough to fit the door opening.

Classic Exmoor-They are impossible to deal with. The only way to buy there stuff is through RN, otherwise be prepared to get screwed.

[wooday]

I would send it back and get the correct one.
If you told them the year/make/model of your truck, they should have sent you the correct top. It should fit without modifications - the Exmoor tops are expensive and modifications aren't cheap (if they're done by someone who knows what they're doing). Having someone modify the one you've been given could just F it up.

If you have a solid leading edge, it sounds like they gave you a top for the newer style Defender header, not for a Series. Mine had the holes like the one pictured.

Seems i was shipped the Defender 110 top. Any way to modify it to work.. or send it back to the UK?

The new EXmoor top i bought doesnt have the recest holes in the front as pictured. Its solid across the front w/ a sewn rope inside to be tucked under the lip. When i tuck it under there.. then its not long enough to fit the door opening.

[allende]

Header Rail Woes

Exmoor's last batch of header rails was wrong -- the teeth are too far up. Waiting for replacement from them. New buyers should beware of this anomaly.

[stonefox]

I'm getting PM'd about once per week since posting about a PDF file with instructions that I have. I believe those who have received it found it useful. Can Les or someone post it here so I don't have to email it out over and over?
Les, I sent it to you a while back. If you don't have it anymore I'll gladly send it again.
Thx

Has this pdf been posted somewere on this sticky ,I don't seem to see it. I don't want to pester Wooday for If its all ready on here
Thanks Sean

[TSR53]

Has this pdf been posted somewere on this sticky ,I don't seem to see it. I don't want to pester Wooday for If its all ready on here
Thanks Sean

Hi Sean, yes I've posted this as a download on page 1 of this thread.

[stonefox]

Hi Sean, yes I've posted this as a download on page 1 of this thread.

Thompson forgive my ignorance ,but I'm not seeing it.I see were you started a sticky but not a download . Sean

[jac04]

It's in Post #2.

Here it is:

http://c7716.r16.cf2.rackcdn.com/RN-Forum/users/TSR53/LR-Series-How-to-go-from-hard-to-soft-top.pdf

[stonefox]

My wife says I can't hear, I guess I can't see as well.Thanx

[crankin]

Here is another PDF showing and install.

http://forums.lr4x4.com/index.php?app=core&module=attach&section=attach&attach_id=32122

[jac04]

^^ Linky no worky.