What did you do to your Rover today?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Manny
    replied
    Bled brakes and changed all of the gear oil including the overdrive on the Warthog . She is one happy pig.

    Leave a comment:


  • Boston
    replied
    Ordered parts to repair wiper system.

    Leave a comment:


  • Jim-ME
    replied
    Lets see a picture please.
    Jim

    Leave a comment:


  • Manny
    replied
    Installed my new 3/4 tilt on my SWB 88. Looks pretty good and I like that it has side windows.

    Leave a comment:


  • Revtor
    replied
    pulled my 2.25 p's head over thanksgiving and got it to the machinist. All 8 guides are shot and it needs 4 new exhaust valves!! Will be great to finally get it running smoothly and dial the carb and timing in. . . Ordering parts today.

    Leave a comment:


  • Manny
    replied
    Nice! That's my project before next summer.

    Leave a comment:


  • Ncrover725
    replied
    Installed exmoor accoustic trim to my IIa
    Click image for larger version

Name:	mat.jpg
Views:	1
Size:	101.2 KB
ID:	167453

    Leave a comment:


  • clsolis
    replied
    Headlight upgrade with proper relays, H4 bulbs, E class headlights and 12g wires for the 110

    Leave a comment:


  • Boston
    replied
    sprayed new half doors with primer and top coats.

    Leave a comment:


  • Manny
    replied
    Painted and installed my new door tops! No more rust!!!

    Leave a comment:


  • pjsank
    replied
    Bad and Good day for the 109. Bad was some vandal had slashed the canvas, foot long vertical, two feet horizontal on the passenger side above the rear wheel well. Would have been easier to just untie a rope, but we grow them stupid here. Nothing stolen. Good was got the pick-up cab bolted on. Looks pretty smart to boot!

    Leave a comment:


  • dvoight
    replied
    I ordered my Timm Cooper Disc Brake conversion from Roam Offroad...Very excited. Also removed the radiator and started trying to figure out how this power steering system works.

    Leave a comment:


  • cedryck
    replied
    Ted I have to admit I was warned that stock oem exhaust will rot away quickly, so to keep cost down I went for cheap replacement parts, next will be a stainless, I would hope it will last a little longer, yes,

    Leave a comment:


  • TedW
    replied
    Originally posted by cedryck
    Installed new exhaust system as the other "it will last only two years in New England" exhaust system went south at the intermediate pipe, our host supplied all of the pertinent hardware and parts, sounding good and proper, after truck filled with smoke as I left all of the stickers on, and when heated up made a little smoke. All is right now,,
    My stainless exhaust went on in '94. It's still there after 18 Maine winters - only the intermediate pipe has been replaced (5 or so years ago).

    Leave a comment:


  • cedryck
    replied
    Installed new exhaust system as the other "it will last only two years in New England" exhaust system went south at the intermediate pipe, our host supplied all of the pertinent hardware and parts, sounding good and proper, after truck filled with smoke as I left all of the stickers on, and when heated up made a little smoke. All is right now,,

    Leave a comment:

Working...